RF Signal Analysis Software
Types: CW and stationary modulated carriers
Options
Power: ≥dBm, dB above noise floor. RBW: auto select, user-selectable.
Search windows: Start time, stop time relative to start time.
Results: Number of matches, carrier frequency, bandwidth, start time, duration, power, save results. Prune results: from saved results file, next search.
Prune IF (matching carrier): frequency, bandwidth, start time, duration, or power (≥ or ≤ user-specified value), inside or outside user specified range.
Types: Search to match user-specified saved reference waveform, I&Q time domain matching
Options: Correlation level, high selectivity filter, reference waveform (one or many), frequency shifting modes (auto or manual), time parameters. Reference waveform at f1, capture file at f2, shift (f2-f1). Included Waveforms EDGE, IEEE-802.11a/g, LTE, normal, extended prefix, 1.4, 3, 5, 10, 20 MHz.
Results: Number of matches, carrier frequency, start time, confidence, Waveform File
Types: Search and quantify pulsed waveforms in capture file.
Options: Detection threshold power level, start and stop time for search, compute pulse frequencies, smoothing number of points.
Results: Peak power, average power, start time in file, width, PRI, rise time, fall time (10% to 90% referenced to detection threshold power level, phase, frequency. Sort results by any results parameters. Prune results: from saved results file, next search. Prune (matching pulse): peak power, average power, start time, width, PRI, and frequency (≥ or ≤ user-specified value), inside or outside user specified range).